Publications by Year: 2016

C. Siviy, et al., “Optimization of soft exosuit peak force with ramp and step sweep protocol,” Dynamic Walking. 2016. Abstract Poster
Self-Assembling, Low-Cost, and Modular mm-Scale Force Sensor
J. B. Gafford, R. J. Wood, and C. J. Walsh, “Self-Assembling, Low-Cost, and Modular mm-Scale Force Sensor,” IEEE Sensors Journal, vol. 16, no. 1, pp. 69-76. [Cover Article], 2016. Publisher's VersionAbstract

The innovation in surgical robotics has seen a shift toward flexible systems that can access remote locations inside the body. However, a general reliance on the conventional fabrication techniques ultimately limits the complexity and the sophistication of the distal implementations of such systems, and poses a barrier to further innovation and widespread adoption. In this paper, we present a novel, self-assembling force sensor manufactured using a composite lamination fabrication process, wherein linkages pre-machined in the laminate provide the required degrees-of-freedom and fold patterns to facilitate self-assembly. Using the purely 2-D fabrication techniques, the energy contained within a planar elastic biasing element directly integrated into the laminate is released post-fabrication, allowing the sensor to self-assemble into its final 3-D shape. The sensors are batch-fabricated, further driving down the production costs. The transduction mechanism relies on the principle of light intensity modulation, which allows the sensor to detect axial forces with millinewton-level resolution. The geometry of the sensor was selected based on the size constraints inherent in minimally invasive surgery, as well as with a specific focus on optimizing the sensor's linearity. The sensor is unique from the fiber-based force sensors in that the emitter and the detector are encapsulated within the sensor itself. The bare sensor operates over a force range of 0-200 mN, with a sensitivity of 5 V/N and a resolution of 0.8 mN. The experimental results show that the sensor's stiffness can be tuned using a thicker material for the spring layer and/or encapsulation/integration with soft materials. The empirical validation shows that the sensor has the sensitivity and the resolution necessary to discern the biologically relevant forces in a simulated cannulation task.

D. L. Miranda, et al., “Sensory Enhancing Insoles Modify Gait during Inclined Treadmill Walking with Load,” Medicine & Science in Sports & Exercise, vol. 48, no. 5, pp. 860-868, 2016. Publisher's VersionAbstract

Introduction: Inclined walking while carrying a loaded backpack induces fatigue, which may destabilize gait and lead to injury. Stochastic resonance (SR) technology has been used to stabilize spatiotemporal gait characteristics of elderly individuals but has not been tested on healthy recreational athletes. Herein, we determined if sustained vigorous walking on an inclined surface while carrying a load destabilizes gait and if SR has a further effect.

Methods: Participants were fitted with a backpack weighing 30% of their body weight and asked to walk at a constant self-selected pace while their feet were tracked using an optical motion capture system. Their shoes were fitted with SR insoles that were set at 90% of the participant’s sensory threshold. The treadmill incline was increased every 5 min until volitional exhaustion after which the treadmill was returned to a level grade. SR stimulation was turned ON and OFF in a pairwise random fashion throughout the protocol. Spatiotemporal gait characteristics were calculated when SR was ON and OFF for the BASELINE period, the MAX perceived exertion period, and the POST period.

Results: Vigorous activity increases variability in the rhythmic stepping (stride time and stride length) and balance control (double support time and stride width) mechanisms of gait. Overall, SR increased stride width variability by 9% before, during, and after a fatiguing exercise.

Conclusion: The increased stride time and stride length variability may compromise the stability of gait during and after vigorous walking. However, participants may compensate by increasing double support time and stride width variability to maintain their stability under these adverse conditions. Furthermore, applying SR resulted in an additional increase of stride width variability and may potentially improve balance before, during, and after adverse walking conditions.

J. B. Gafford, S. Russo, T. Ranzani, R. J. Wood, and C. J. Walsh, “Snap-On Robotic Wrist Module for Enhanced Dexterity in Endoscopy,” in IEEE International Conference on Robotics and Automation (ICRA), Stockholm, Sweden, 2016, pp. 4398-4405. Publisher's VersionAbstract
Burgeoning transendoscopic procedures, such as endoscopic submucosal dissection (ESD), provide a promising means of treating early-stage gastric neoplasia in a minimally-invasive way. However, the remote locations of these lesions, coupled with their origination in the submucosal layers of the gastrointestinal tract, often lead to extreme technical, cognitive and ergonomic challenges which combat the widespread applicability and adoption of these techniques. Among these challenges is achieving the in vivo dexterity required to retract and dissect tissue. By leveraging workspace and force data obtained through clinical studies, we developed a modular, disposable, distally-mounted actuator (an 'active endcap') that can augment an endoscopist's distal dexterity in ways that are not achievable with the endoscope's built-in degrees-of-freedom. The device consists of a flexible articulating 'exoskeleton' manufactured via printed-circuit MEMS (PCMEMS) which engages and deflects electrosurgical tools that are passed through the endoscopic working channel. Embedded proprioceptive sensing is implemented on-board using distributed LED/phototransistor pairs and the principle of light intensity modulation (LIM). The distal degree-of-freedom is actuated using shape memory alloy (SMA) technology, and the actuation transmission system is fully contained within a 1-inch-long end cap that can be mounted on the distal end of the endoscope, thereby obviating the need for a mechanical connection to a proximal source. Proof-of-concept tests demonstrate that the actuator adds over 50 degrees of distal articulation to existing tools and can generate 450 mN of lateral force which has been clinically determined to be sufficient for performing circumferential incisions in ESD.
L. N. Awad, et al., “A soft exosuit for assisting poststroke walking,” 9th World Congress of Neurorehabilitation. 2016. PDF
S. Russo, T. Ranzani, J. B. Gafford, C. J. Walsh, and R. J. Wood, “Soft pop-up mechanisms for micro surgical tools: design and characterization of compliant millimeter-scale articulated structures,” in IEEE International Conference on Robotics and Automation (ICRA), Stockholm, Sweden, 2016, pp. 750-757. Publisher's VersionAbstract
This paper introduces a manufacturing technique which enables the integration of soft materials and soft fluidic micro-actuators in the Pop-up book MEMS paradigm. Such a technique represents a promising approach to the design and fabrication of low cost and scalable articulated mechanisms provided with sensing capabilities and on-board actuation with potential applications in the field of minimally invasive surgery. Design and integration of soft components in the rigid-flex laminates is described along with the resulting soft pop-up mechanisms realized at different scales. Prototype characterization is presented, demonstrating forces and dexterity in a range suitable for surgical applications, as well as the possibility to integrate sensing capabilities. Based on these results, a multi-articulated robotic arm is fabricated and mounted on top of an endoscope model to provide a proof of concept of simple robotic mechanisms that could be useful in a surgical scenario.
L. N. Awad, et al., “Soft Wearable Robots Can Reduce the Energy Cost of Poststroke Walking: A Proof-of-Concept Study,” Combined Sessions Meeting of the American Physical Therapy Association (APTA CSM). 2016. PDF
P. Malcolm, et al., “Study of the contribution of negative work assistance at the ankle with a multi-articular soft exosuit during loaded walking,” Dynamic Walking. 2016. PDF
M. B. Yandell, D. Popov, B. Quinlivan, C. J. Walsh, and K. E. Zelik, “Systematic evaluation of human-exosuit physical interfaces,” Dynamic Walking. 2016. PDF
Y. Ding, I. Galiana, C. Siviy, F. A. Panizzolo, and C. J. Walsh, “IMU-based Iterative Control for Hip Extension Assistance with a Soft Exosuit,” in IEEE International Conference on Robotics and Automation (ICRA), Stockholm, Sweden, 2016, pp. 3501-3508. Publisher's VersionAbstract

In this paper we describe an IMU-based iterative controller for hip extension assistance where the onset timing of assistance is based on an estimate of the maximum hip flexion angle. The controller was implemented on a mono-articular soft exosuit coupled to a lab-based multi-joint actuation platform that enables rapid reconfiguration of different sensors and control strategy implementation. The controller design is motivated by a model of the suit-human interface and utilizes an iterative control methodology that includes gait detection and step-by-step actuator position profile generation to control the onset timing, peak timing, and peak magnitude of the delivered force. This controller was evaluated on eight subjects walking on a treadmill at a speed of 1.5 m/s while carrying a load of 23 kg. Results showed that assistance could be delivered reliably across subjects. Specifically, for a given profile, the average delivered force started concurrently with the timing of the maximum hip flexion angle and reached its peak timing 22.7 ± 0.63% later in the gait cycle (desired 23%) with a peak magnitude of 198.2 ± 1.6 N (desired 200 N), equivalent to an average peak torque of 30.5 ± 4.7 Nm. This control approach was used to assess the metabolic effect of four different assistive profiles. Metabolic reductions ranging from 5.7% to 8.5% were found when comparing the powered conditions with the unpowered condition. This work enables studies to assess the biomechanical and physiological responses to different assistive profiles to determine the optimal hip extension assistance during walking.